How to save water? Tried-and-tested ways to make it easier for you!

Why is it worth saving water?

Saving water is not just a matter of ecology, but also has a very concrete impact on your household budget. The water you use involves not only the cost of the supply itself, but also sewage disposal and heating.

In practice, this means that every extra minute in the shower or a leaking tap generates real costs that accumulate over the course of a month and a year.

A lack of control over water consumption leads to:

• higher water and sewage bills,
• greater strain on the drainage system,
• higher energy consumption needed to heat the water,
• a larger environmental footprint for the household.

Saving water does not require radical changes. A few conscious decisions are enough to reduce consumption without losing daily comfort.

1. How to check if you are wasting water through leaks?

A leaky installation is one of the most common reasons for uncontrolled water consumption. The problem is that you often don’t notice it for a long time. A leaking valve or a slight “overflow” in the cistern can generate losses for many weeks.

Before you start investing in new solutions, check the basics. This is a simple step that can quickly yield results.

Check the following first:

• whether the water meter still indicates flow after turning off all taps,
• whether there is a constant, subtle movement of water in the toilet bowl,
• whether moisture appears under the sink, near the trap, or by the washing machine,
• whether valves are covered with limescale or rust.

Regular inspection of the installation is a key part of prevention. Even a small repair done immediately is cheaper than a later renovation of a flooded wall or replacing damaged components.

2. Does an aerator really reduce water consumption?

Yes, an aerator limits the water flow by aerating it. This makes the stream feel intense, but it actually uses less water. This solution works particularly well in the kitchen and bathroom, where you turn on the tap many times a day for short periods.

An aerator:

• stabilises the stream,
• reduces splashing,
• allows you to reduce flow without losing comfort,
• is easy to install.

In the Rea Bathroom range, you will find taps and solutions that support water reduction, designed so that user comfort remains at the same level.

3. Does a shorter shower really affect the bills?

Yes, because shower time directly translates into the amount of water used and the energy needed to heat it. This is a double cost that many people forget about.

It’s not about completely giving up comfort. It’s about consciously shortening the time where possible.

While bathing, you can:

• turn off the water while applying shampoo,
• set a timer on your phone,
• install a shower head with a flow restrictor,
• control the temperature using a thermostat.

A few minutes less each day produces a real effect over a month. This is one of the fastest ways to make a change.

4. Does the toilet generate high water consumption?

The toilet is one of the most frequently used elements of the water system in the home. Therefore, even a small optimisation in this area can be significant. Instead of replacing the entire installation, start with simple improvements.

You can implement:

• a dual-flush system,
• adjustment of the water volume in the cistern,
• regular checks of the valve tightness,
• replacing an old mechanism with a more efficient one.

In modern bathrooms, concealed solutions are increasingly used, allowing for precise setting of flushing parameters.

5. How to reduce water consumption when washing up?

The way you wash dishes matters immensely. Many people don’t pay attention to how much water flows through the tap during a single washing session. The most important thing is to eliminate the habit of leaving the stream running constantly.

If you wash by hand:

• fill the sink bowl instead of washing under running water,
• use an aerator,
• rinse dishes in batches,
• do not defrost products under running water.

If you use a dishwasher, run it only with a full load. This rule also applies to the washing machine.

6. Does collecting rainwater make sense?

In a detached house, this is a very practical solution. Rainwater can replace mains water where drinking water is not required. The applications are truly broad.

You can use rainwater for:

• watering the garden,
• washing the car,
• cleaning the patio,
• cleaning tasks around the house.

This is not only a saving, but also a way to manage resources more consciously.

7. Can you reuse water at home?

Yes, the reuse of so-called greywater is a solution increasingly used in modern construction. It doesn’t have to involve complicated systems. Sometimes a change in approach is enough.

You can reuse:

• water from washing vegetables to water plants,
• water from cooking (after cooling),
• water from the tumble dryer for cleaning,
• water from the air conditioner for chores.

Every such habit reduces the amount of water going directly into the sewage system.

Checklist: how to start saving water from today?

The change doesn’t have to be radical. The most important thing is consistency and implementing a few simple actions.

To start:

• check the tightness of the installation,
• install an aerator in the kitchen and bathroom,
• shorten your daily shower by a few minutes,
• run the washing machine and dishwasher only with a full load,
• collect water for reuse.

Small decisions made every day yield a greater effect than a one-off change.

FAQ

Does saving water really lower bills?

Yes. Lower water consumption also means lower energy consumption needed to heat it.

How much water does an average shower use?

About 10 litres per minute with a standard shower head.

Does an aerator reduce water pressure?

No, because it aerates the stream, maintaining a perceptible pressure.

Is it worth investing in water-saving fittings?

Yes, it is one of the fastest methods of reducing water consumption without changing comfort.